How to Hang a Skateboard Deck on The Wall – 7 Ways Described

How to Hang a Skateboard deck on the wall
how to hang a skateboard on the wall

Mainly, Here I described 7 ways in two sections step by step. They are, How to hang skateboard on the wall vertically and horizontally. You can choose a suitable method as your comfort.

Skateboards can indeed be fun to ride, but did you know you can even use these for decoration purposes on your walls? 

It doesn’t matter whether you use it for playing around regularly or occasionally. Still, there are specific ways you can hang skateboards on your wall to make it look more attractive, convenient, and creative. 

Moreover, if you have a brick wall or wooden wall, trust me will look aesthetic. Even on a concrete wall, your skateboards will just give out an excellent decoration to your room!

So, in this article, I’ll be telling you all the ways of how to hang a skateboard on your walls to give your space an entirely creative look.

How to Hang a Skateboard on The Wall Vertically?

There are many methods that you can use to hang your skateboard on the walls. In this section, I’ll step by step describe to you the best four ways you can hang your skateboards on your elegant-looking walls.

1. Hang with Wall Mount

One of the ways you can hang your skateboard is by using wall mounts so that it can creatively display your skateboard decks. 

It’s going to give that aesthetic look on your wall, and trust me; you’ll just love it! It’s effortless to hang your skateboard using this method. So, follow all these instructions step by step so that you can do it by yourself.

 Step 1: Drill a small hole and slide a wall anchor:

Here, in this step, you’ll be drilling a small hole in your wall where you want to hang your deck. After that, slide a tiny wall anchor into that hole and ensure that this anchor can effectively hold the weight of your deck.  

Step 2: Secure the deck display with a robust screw

After successfully attaching the anchor, make sure that your deck display comes with a strong screw. Hold your skateboard display against your wall, and then line up with the hole at the very center where you have drilled. To make a clean hole, you can use a good-quality electric drill!

Step 3: Twist those bolts towards your wall and slide the skateboard onto the display

Once you have secured the display onto the wall, take two bolts and twist them tightly on each side of the skateboard. After that, align them properly so that you can easily slide the skateboard onto the wall when you hang your skateboard. 

Step 4: Make the final twists on the display

After you have done all these procedures correctly, twist two T nuts onto the deck until you feel the nuts are tightly held! 

With this, you can securely hold your skateboard deck in the proper place and keep any of the deck’s parts from touching your wall. 

So, this is how just by these four simple steps, you can wall mount your skate deck!

The Type of Mount Deck Display Holder You Can Choose

Now, you must wonder what type of mount deck display you can get for yourself?

In this case, I’ll suggest you go for Alpinista Skateboard Wall Mount Display.  I will say this is one of the classy and luxurious-looking mount deck display holders you can get for yourself. 

Moreover, this product is of high quality and has all the necessary features required to give you that aesthetic look!

Alpinista Skateboard Wall Mount
Alpinista Skateboard Wall Mount

Check Price On amazon

 Alpinista Skateboard Wall Mount gives you:

  • The best and authentic products are all designed and manufactured by Skateptych
  • Lifetime warranty with a high-quality and premium looking hanger
  • the floating effect that will simply make you feel that your skateboard is floating in mid-air
  • Reinforced thermoplastic that comes with high-quality stainless-steel bolts and screws. Even improved threading so that your skateboard gets better stability
  • Easy and straightforward to install and you’ll also be provided with instructions so that you don’t feel any trouble
  • With additional wall anchors and black caps

2. Hang it on a Pushpin

Another method you can use is to hang your skateboard on a pushpin. The installation process is straightforward, and you don’t even need to go through any hassles as well. Follow all these steps, and you can easily do it yourself!

 Things you’ll need:

  • Nail or a push pin
  • Shoelace

 Step 1: Lace your skateboard’s bottom bar

At first, take the ends of your shoelace and put it right through your skateboard’s bottom hole. Then pull the laces out of the deck from the back. 

When you create the bottom bar by your shoelace, make sure that both the ends are leveled. 

Step 2:  Lace the deck’s vertical bars

On the back of your skateboard, take a piece of the shoelace, then put it right through the vertical hole of the front of your deck. Do repeat the entire procedure with the other side of the lace. 

Step 3: Tie the lace

After you have completed this procedure, make sure that both ends are appropriately laced through. Just simply tie the laces’ knots like you tie your shoelace! 

But do make sure that you keep some space in the loop because you have to hang the skateboard later on.

Step 4: Put the pin on the wall

After all of these loop makings are over, push a pin on your desired place on the wall. And do make sure that it’s straight!

Finally, take the loop attached to the back of the deck and put it onto the pushpin. 

Or, you can even use a nail in place of a pushpin. But in this case, you’ll be needing a hammer to attach the nail onto the wall. Moreover, you can adjust the shoelace knots to keep your skateboard straight. 

With these simple four steps, you can easily hang your skateboard deck on a pushpin!

Recommended

Yalis Push Pins 600 Count, Standard Clear Thumb Tacks Steel Point and Clear Plastic Head

Yalis Push Pins 600 Count, Standard Clear Thumb Tacks Steel Point and Clear Plastic Head

  • Material: PS
  • Color: Clear
  • Size: Small
  • Brand: Yalis

Check Price On amazon

3. Hanging Using Fishing Line

This method of hanging your skateboard is indeed straightforward and effective. The following steps would show you how you can use a piece of fishing line to hang your skateboard. 

Step 1: Remove the trucks of your skateboard

Firstly, turn the skateboard the other way round, then use pliers to hold any bolts on a truck in place. After that, insert the end of the screwdriver into the top screw of the deck. 

Keep on twisting your screwdriver until the screw ultimately comes out. Repeat this entire procedure three times to remove one truck. And then do the same for the other truck. 

Step 2: Pass a thin fishing line into these holes on your deck

Find out the two screw holes closest to the skateboard. After that, cut off 0.30m or 1 foot of the fishing line with a pair of good-quality scissors. 

Then hold the deck tightly with the underside (which is facing you) and pass the fishing line through one of the holes. Then take this same line and pass it towards you from the other side. 

Step 3: Tie a proper knot 

You should know that fishing lines are very slippery, so keep in mind to make such a knot firmly held. Try making a granny knot instead. 

Don’t go on tying the line too close to those holes in your skateboard deck. Instead, allow little slack between the deck and the knot. This will help you to hang your skateboard easily on the wall. 

Step 4: Hammer a strong nail on the wall

In this step, you have to put a nail onto the wall with a hammer!

Take a strong nail and hold it tightly onto the position of the wall where you want to place your skateboard. Then take a hammer and very delicately hammer that nail into your wall. 

Keep on hammering as long as the nail doesn’t get halfway into the wall, but don’t hammer it entirely into the wall, as you need some part of it flashing outward. 

Finally, take the skateboard and hang your fishing line onto the nail!

Note: If you have multiple skateboard collections and you want to hang all of those onto your wall, then, in this case, you might have to use a pencil (to make vertical lines on the wall) and a tape measure to take down the measurements of where you can place these decks on your walls. 

Step 5: Final touch with wall hooks

I will suggest that instead of hammering nails onto your walls, you can go for solid hooks if drilling is not available. In this way, your fishing line will also stay durable as there will be less friction between the nail and the line. 

To place the hook correctly, you can use a pencil and a straight line where you want to see your skateboard hanging. In this way, when you hang your deck, it’ll straight at a proper alignment. 

Note: It’s highly advisable to have a fishing line that is mainly made of nylon. As nylon rope is robust, so it can easily withstand the weight of your skateboard without breaking. Moreover, you can also have a durable knot with nylon.

Recommended

Clear Fishing Wire, Acejoz 656FT Fishing Line Clear Invisible Hanging Wire Strong Nylon String Supports 40 Pounds for Balloon Garland Hanging Decorations

Clear Fishing Wire, Acejoz 656FT Fishing Line Clear Invisible Hanging Wire Strong Nylon String Supports 40 Pounds for Balloon Garland Hanging Decorations

  • Material: Nylon
  • Color: Invisible
  • Line Weight: 40 pounds
  • Brand: Acejoz

Check Price On amazon

4. Hanging with Picture Hanger

This is another method that you can use to hang your skateboard vertically. For this procedure of hanging your skateboard, you have to get yourself a few drywall anchor plugs, a picture hanging cable or wire, and some screw eyes. 

Drywall anchors are those tiny plastic plugs that can be used to drill the screws into the walls, but these screws are not like those screws that fill up the entire hole of your wall. Instead, these just fill up those holes in your skateboard deck so that you can screw the eyelet into it. 

The procedure goes as follows:

Step 1: Get an anchor that fits well to your board. 

In this step, you’ll need a plastic wall anchor that fits perfectly with the hole of the deck and the screws. For this, you do need to search a bit for the correct size screws for your deck. 

Step 2: Trim your anchor

Trim your skateboard’s anchor to the correct length using pliers. Then jam the round part of your anchor into the hole and make sure that you use the pliers to force it inside. 

For this, you can get a tight-fit anchor so that your skateboard stays perfectly straight when you hang it on the wall. 

Step 3: Screw the eyelet

Grab the best eyelet for your skateboard and screw it right into the anchor. Make sure that everything is perfectly fit in place. 

After that, cut yourself an appropriate length of metal picture cable and accurately attach it to each of the eyelets, and do tie it tightly. Here too, you need to make sure that the wire has some slack so that your skateboard can hang freely—don’t make the cables too tight!

Recommended

GETMOVIN SPORTS Hook and Ring Swing DIY Kit Stainless Steel

  • Material: Stainless Steel
  • Brand: GETMOVIN SPORTS

Check Price On amazon

Assorted Picture Hanging Kit-220 Piece Assortment with Wire, Picture Hangers, Hooks, Nails and Hardware

  • Brand: Hecho

Check Price On amazon

How to Hang a Skateboard on The Wall Horizontally?

Now, we already know how to hang skateboards vertically. But don’t you wonder how to hang it horizontally?

Displaying the skateboard decks horizontally on the walls has always been on trend for many years. And people just love this trend as it increases the beauty of creativity of your space. 

So, in this section of the article, I’ll tell you all the best and easy methods of how you can perfectly hang your deck horizontally.

5. Hanging on a Rope to Store a Skateboard on a Wall

This method of hanging your skateboard is straightforward to do. Just go through the following steps, and you can do it by yourself.  

Step 1: Cut a rope with a length of 64 cm

In this step, you have to get yourself a durable and robust rope so that there are fewer chances of breaking when you hang your skateboard. 

It’s best if you have a rope of  ¼ inch with a diameter of 0.64 cm. For a precise length, take a measuring tape or a ruler and cut the rope with a sharp knife. 

Note: Do make sure to see a sharp knife, as if you use a blunt knife, then there are chances you might not cut the rope with proper precision!

Step 2: Tie the knots and burn the rope on both ends

Now, you have to tie a simple knot on each end of your rope and make sure that the pulling ends are tight. 

After that, carefully lit a lighter under one end of the rope and held it for a couple of seconds. Then repeat the whole thing for the other end of the rope. This will help your rope from fraying.

Step 3: Mark on the wall

The place you want your skateboard to hang horizontally, mark that place with a ruler, making two horizontal lines. These lines must be of equal height, but they are 36 cm or 14 inches apart. 

Step 4: Push screws past the knots

In this final step, push a rigid screw through one of the knots and then screw it on the screw spots you marked on the wall. Do the same with the other side of the knot. After that, you can easily hang the skateboard horizontally on the wall. 

6. Using Horizontal Wall Mount

This is another method that you can use to mount your skateboard horizontally on your wall. And this technique of hanging your skateboard is also effortless and reliable. 

Moreover, if you follow all these steps, there’s no chance that your skateboard will fall over. 

Step 1: 

Take two wall mounts and thread both with long bolts. You can also use a spanner to make the nuts and bolts tighter. But do make sure that the nuts and bolts are well secured on both the wall mounts. 

Step 2:

Put a mark on your wall, precisely on the place you want your screw to go through. Keep in mind; the screw should always be slightly above the topmost screw holes of your skateboard. 

You can screw the mounts on the walls with a cross-head screwdriver or even a drill. It’s entirely on to your choice. 

Step 3: 

Now, as your mount plate has been fixed on the wall, you can slide your skateboard deck onto those two bolts. Ensure that you push your deck far back so that there’s no chance for your skateboard to fall. 

Step 4: 

In the end, you can screw dome nuts onto the edge of the long bolts so that these nuts stay tightened. Therefore, your skateboard will also stay secure. 

If you think that screwing the dome nuts is a challenge with bare hands, then you can take a spanner to ensure the bolts are tight.

Recommended

Alpinista Skateboard Wall Mount Horizontal Deck Display Luxury Skate Rack

Alpinista Skateboard Wall Mount Horizontal Deck Display Luxury Skate Rack

  • Material: Made of acrylic, reinforced thermoplastic.
  • Brand: Alpinista

Check Price On amazon

How to Hang a Skateboard Deck on the Wall Without Nails and Drill?

If you don’t want to see holes on your walls, then this section will give you all the guidelines of how you can hang your deck just by using a utility hook, a zip tie, and canned air. You don’t need to bother to drill or make screw holes on your walls by this procedure. 

7. Hanging on a Hook or Utility Hook

 Step 1: 

Take the canned air and gently spray on the position of the wall where you want to place your skateboard. The reason for this spraying is, it’ll remove all the dust that’s on the wall. 

Step 2: 

Make measurements of where you want to place the utility hook. Then you peel the back of the hook and stick it on your desired position on the wall. 

Utility hooks are those types of hooks you use to hang your clothes. It’s very durable, and you can also easily remove them whenever you like.

Step 3: 

Insert the zip tie right through the holes of your skateboard. And make sure that it makes a loop so that you can easily hang it on the utility hook. 

The best part about zip ties is it’s powerful, and you don’t need to worry about these breaking or tearing. 

This is how you can hang your skateboard deck without even needing to drill screw holes on your wall. 

Are you wondering where to get all these items for hanging your skateboard? Just read the section below for all the details.

Best Utility Hooks, Canned Air, and Zip Ties

You will hang your skateboard with any drilling or screwing, so you need to get some items for this procedure. Therefore, here in this section, you know all the ins and outs of all the products I mentioned above. 

Large Utility Hooks-

If you want the best and long-lasting utility hooks, “Command” is your optimum choice.

Recommended

Command Large Utility Hooks, 7-Hooks, 12-Strips, Organize Damage-Free

Command Large Utility Hooks, 7-Hooks, 12-Strips, Organize Damage-Free

  • Material: Plastic
  • Color: white
  • Brand: Command

Check Price On amazon

Command utility hooks give you:  

  • Beautiful and classy looking hooks Line 2
  • It’ll not do any sort of damage to your walls
  • You can even these hooks to hang your clothes and other accessories like your kitchen utensils. 
  • It’s versatile and robust so that it can withstand a decent amount of weight
  • It can also be removed easily

Canned Air for Cleaning Dust-

You simply can’t have an alternative option rather than Falcon. If you are looking for the cheap and most effective canned air, then undoubtedly Falcon is the best in the market right now!

Recommended

Falcon Dust, Off Compressed Gas (152a) Disposable Cleaning Duster

Falcon Dust, Off Compressed Gas (152a) Disposable Cleaning Duster

  • Item Volume: 100 Milliliters
  • Item Weight: 0.35 Pounds
  • Brand: Falcon

Check Price On amazon

 Falcon Canned Air is:

  • Easy to use and can effectively dust off any dirt on your walls
  • 100% ozone safe bitterant
  • Compact
  • Essential for those places where the space is quite tight
  • Effective in blasting dense spray

Zip Ties-

TR Industrial produces one of the most robust and most durable cable ties, a.k.a. Zip ties ever!

TR Industrial is your ideal option if you are looking for a durable and high-tensile strength zip-tie. 

Recommended

TR Industrial Multi-Purpose UV Resistant Black Cable Ties

TR Industrial Multi-Purpose UV Resistant Black Cable Ties

  • Material: Nylon 6/6
  • Color: Black
  • Number Of Pieces: 100
  • Brand: TR Industrial

Check Price On amazon

 TR Industrial provides you with: 

  • Nylon string that has a strength of 6/6
  • 50 lbs tensile strength
  • The working temperature of 40-85 degrees C
  • The ability to use it for various purposes.

Bottom Line 

You can say hanging your skateboard on the wall is more like art. With these simple hanging methods, you can very efficiently and effectively hang your skateboard on the wall. 

But do make sure that whenever you hang your decks on the wall, you follow these guidelines so that you don’t face any troubles. 

I hope this article will now help you to know all the ins and outs of how you can hang your skateboard on the wall

Leave a Reply

Your email address will not be published.